Осциллограф+AWG MDO-2302AG

  • үнэ: 9,000,000 төг


- 300MHz bandwidth selections ;2 channels

- Real time sample rate is 2GSa/s max.

- Per Channel 20M memory depth and VPO waveform display technology

- Waveform update rate up to 120,000 wfms/s

- 8 “ WVGA TFT LCD display

- Maximum 1M FFT provides higher frequency domain resolution measurements

- High ,low and band pass filter functions

- 29,000 segmented memories and waveform search functions

- I2C/UART/CAN/LIN serial bus trigger and decoding function

- Data log function is able to track signal changes up to 1000 hours

- Network storage function

- Mask test function

- MDO-2000AG equips with a dual channel 25MHz AWG


Channels Bandwidth (-3dB) Rise time Bandwidth Limit (-3dB)
MDO-2302AG 2ch+Ext DC~300MHz 1.17ns 20M/100/200MHz
MDO-2000A series Specifications
MDO-2102A/AG MDO-2202A/AG MDO-2302A/AG
Channels 2CH+ EXT.






Rise time 3.5ns 1.75ns 1.17ns
Bandwidth Limit 20MHz 20M/100MHz 20M/100M/200MHz
Vertical Sensitivity


8 bit
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF approx.

DC Gain Accuracy

±(3%)when 2mV/div or greater is selected
±(5%)when 1mV/div is selected;
Polarity Normal & Invert
Maximum Input



300Vrms, CAT I



Offset Position Range

1mV/div ~ 20mV/div : ±0.5V
50mV/div ~ 200mV/div : ±5V
500mV/div ~ 2V/div : ±25V
5V~10V/div : ±250V
Waveform Signal



+, -, ×, ÷, FFT, User Defined Expression.

FFT: 1Mpts

FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or Blackman.

Source CH1 ,CH2 Line, EXT
Trigger Mode Auto (supports Roll Mode for 100ms/div or slower), Normal, Single Sequence

Trigger Type

Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate, Time out, Event-Delay(1~65535 events), Time-Delay(Duration,4nS~10S), Bus
Holdoff range 4ns~10s
Coupling AC, DC, LF rej., HF rej. , Noise rej.


Sensitivity 1div
External Trigger
Range ±15V



DC ~ 100MHz Approx.100mV
100MHz ~ 200MHz Approx. 150mV
200MHz ~ 300MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF

Time base Range

1ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger 10 div maximum
Post-trigger 2,000,000 div maximum.
Time base Accuracy ±50 ppm over any ≥ 1ms time interval
Real Time Sample




Record Length Per Channel 20M pts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection 2ns (typical)
Average selectable from 2 to 256
X-Y Mode
X-Axis Input Channel 1
Y-Axis Input Channel 2
Phase Shift ±3° at 100kHz
Cursors and Measurement
Cursors Amplitude, Time, Gating available unit: Seconds(s), Hz(1/s) ,Phase(degree) ,Ration(%)

Automatic Measurement

38 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle

Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime,

+Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, %Flicker ,Flicker Idx,FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase

Control Panel Function
Auto counter 6 digits, range from 2Hz minimum to the rated bandwidth


Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with

undo Autoset

Save Setup 20 sets
Save Waveform 24 sets
TFT LCD Type 8″ TFT LCD WVGA color display
Display Resolution 800 horizontal × 480 vertical pixels (WVGA)
Interpolation Sin(x)/x
Waveform Display Dots, vectors, variable persistence (16ms~4s), infinite persistence
Waveform Update Rate  

120,000 waveforms per second, maximum

Display Graticule 8 x 10 divisions
Display mode YT ;XY


USB Port USB 2.0 High-speed host port X1, USB 2.0 High-speed device port X1
Ethernet(LAN) Port RJ-45 connector, 10/100Mbps with HP Auto-MDIX
Go-NoGo BNC 5V Max/10mA TTL open collector output
Kensington Style



Rear-panel security slot connects to standard Kensington-style lock.

Spectrum Analyzer Specifications
Frequency range DC~1GHz (Max. ,Max.bandwidth~1GHz uncalibrated)
Span 1kHz~1GHz(Max.)

Resolution bandwidth


1Hz ~ 1MHz(Max.)

Reference level -50 dBm to +40dBm in steps of 5dBm
Vertical units dBV RMS; Linear RMS; dBm
Vertical position -12divs to +12divs
Vertical scale 1dB/div to 20dB/div in a 1-2-5 Sequence
Display average

noise level

1V/div < -50dBm, Avg : 16

100mV/div    < -70dBm, Avg : 16

10mV/div    < -90dBm, Avg : 16

Spurious response 2nd harmonic distortion< 40dBc

3rd harmonic distortion< 45dBc

Frequency domain

trace types


Normal ; Max Hold ; Min Hold ; Average (2 ~ 256)

Detection methods Sample ; +Peak ; -Peak ; Average
FFT Windows FFT Factor :
Hanning 1.44
Rectangular 0.89
Hamming 1.30
Blackman 1.68
AWG Specifications (On MDO-2000AG only)
Channels 2
Sample Rate 200 Msa/s
Vertical Resolution 14 bits
Max. Frequency 25 MHz
Waveforms Sine, Square, Pulse, Ramp, DC, Noise,              Sinc, Gaussian, Lorentz, Exponential Rise, Exponential

Fall, Haversine, Cardiac

Output Range 20 mVpp to 5 Vpp, HighZ;10 mVpp to 2.5 Vpp, 50 Ω
Output Resolution 1mV
Output Accuracy 2% (1 kHz)
Offset Range  

±2.5 V, HighZ;±1.25 V, 50 Ω

Offset Resolution 1mV
Frequency Range 100mHz to 25MHz
Flatness ±0.5 dB





-40 dBc




-40 dBc

Total Harmonic Distortion  


S/N Ratio 40 dB
Frequency Range 100 mHz to 15MHz
Rise/Fall time <15ns
Overshoot <3%
Duty cycle Square:50%;Pulse:0.4%~99.6%
Min. Pulse Width 30 ns
Jitter 500 ps
Frequency Range 100mHz~1MHz
Linearity 1%
Symmetry 0 to 100%
Frequency Response Analysis (MDO-2000AG only)
Dynamic Range > 80 dB (typical)
Input and Output



Channel 1 or 2

Frequency Range 20 Hz to 25 MHz
Number of Test



10 to 90 points per decade


Test Amplitude


20 mVpp to 5 Vpp into High-Z ;Fixed test amplitude or custom amplitude for each decade

Test Results Logarithmic overlaid gain and phase plot



Two pairs of tracking gain and phase markers

Plot Scaling Auto-scaled during test
Multi-language menu  


operation environment  

Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C

On-line help Available
Time clock Time and Date ,Provide the Date/Time for saved data
Dimensions 384mmX208mmX127.3mm
Weight 3kg


Санал болгох бараа