Багаж хэрэгсэл > Хэмжих хэрэгсэл > Сүлжээний тестер > Сүлжээний тестер MT-7071K

Сүлжээний тестер MT-7071K

үнэ: 670,000 төг

LCD Cable Length Toner & Prope Kit-1pcs StandardRemote Unit & Multi RemoteUnit ID#1~ID#8 (8 pcs)

Cable Length Measurement up to 1200M

- Measuring cable length to opens up to 1200M. Calibration accuracy: ±3%
- Length measurement in feet, yard or meters
- Cable length measurements without remote attached

Calibration Parameters

- Can determine actual Calibration parameters with known length of cable for cable length test
- Allows setting 1-7 Calibration parameters

Wire Tracing up to 3KM

- The tone and probe kit let you easily tracking wire directly in connection with live telecommunication equipment and router

Cable Mapping & status Indication

– Display the result of pin to pin cable mapping
– Display cable status and troubleshoot wiring for continuity, shorts, opens and crossover.
– Max support to 8 remote units

Non Contact Voltage detection

– Tests voltage from 90 ~ 1000V, special design to make sure the power is off before testing for circuit protection

MT-7071K Toner specifications
Cable types tested	RJ45 Lan cable Cat 5、5e、6、7 (UTP/STP)、RJ11/12 Telephone cable Cat 3 (2/4/6 pin)、Coaxial cable & normal solid/Stranded wire by alligator clips patch cord
Cable test modes	1 KHz two-note tones for location and isolating cables, wire mapping for validate (detects wire continuity, shorts, opens, miswired, crossover) and open length tested.
Measurement technology	Cable capacitance method
Max. distance to opens for test	1,200 meter (4,000 feet/1,300 yard)
Min. distance to opens for test	Split pairs：1 meter (3 feet)、Other cable：1.25 meter (4 feet)
Typical accuracy of length test	±3.0% (±0.5 meter/ ±1.5 feet/ ±0.5 yard)
Calibration accuracy of length test	±2.0% (±0.5 meter/ ±1.5 feet/ ±0.5 yard), standard cable ＞10 meter
Resolution & Unit of length test	0.1 meter/ feet/ yard, Rate：1~3 sec./time
Calibrating parameters memory	1~7 sets, allowing rewrite by new calibrating parameters
Max. distance of transmission & cable map	3 km(1 kHz) & 300 m
Cable map & Shielded indication	LCD 1~8 & G
Other functions	Continuity test, Live telecommunication equipment test and router tes, Voltage protection AC 60V or DC 48V, Auto power off, Low battery display
Dimension (L×W×D)	138×80×35 mm
MT-7071K Receiver specifications
Signal status indication	1 kHz , 1 LED & Buzzer, bulding ear jack
NCV indication & LED illumination	1 LED (AC90~1000V) & 1 LED
Dimension (L×W×D)	198×45×33 mm
MT-7071 Remote unit specifications
Remote unit	1+8 pcs remote units, (Included)
Compatible connectors	RJ45(8 pin)、RJ11/12(6 pin)、BNC connectors
Remote unit dimension (L×W×D)	90×32×30mm
Accessories	RJ45 cable patch cord、RJ11/12 cable patch cord、Alligator clips patch cord、Earphone、pounch bag