KEW 2300R амперклещ True RMS AC/DC 100A
- үнэ: 500,000 төг
FORK CURRENT TESTER KYORITSU KEW 2300R
- - True RMS reading is an essential feature for accurate measurement
- - "Non Contact Voltage" function indicates the presence of AC voltage by warning the user with an audible signal
- - Zero adjustment of DC current is possible at the push of a button
- - Auto Power Off
- - Minimum resolution 0.1A

Product Overview KEW 2300R can be used in crowded connection boxes, where cables are very short, and space is too limited to clamp cables using a traditional clamp meter. True RMS (Root Mean Square) Value Measurement When load current is not affected by the distortion, both averaging value type and true RMS (root mean square) type clamp meters show the almost same value of about 10A with constant wave-form as the above display samples. However, when load current is affected by some distortions such as inverter, etc…,averaging value type clamp meter indicates 5.5A instead of 9.7A and true RMS type clamp meter indicates 7.9A instead of 9.7A with irregular wave-form. Accordingly, true RMS type clamp meter is recommendable for the measurement of the equipment with inverter control devices. (Compared to the true RMS value tester, measurement values for the averaging value generate more than 30% errors in some cases.) Specification

Due to the use of thyristors, inverters and other energy-saving controllers in recent electric wiring, current waveforms often include harmonic components and are distorted compared to sinusoidal waves (50/60Hz).
The Kyoritsu True RMS value tester is able to measure distorted waveforms using true RMS since waveforms are being internally calculated continuously. In contrast, when measurements are made with a averaging value tester, errors are generated in the measurement value because the tester cannot continuously track distorted waveforms.
Current measurement
AC A 0 to 100.0A ±2.0%rdg±5dgt [50/60Hz]
DC A 0 to ±100.0A ±2.0%rdg±5dgt
Crest factor
2.5
Non contact voltage
Detect AC voltage without contacting with socket wire.
During voltage detection, “Hi” flashes and a buzzer sounds.
Maximum digit
1,049
Conductor size
Max φ10mm
Safety Standard
IEC 61010-1 CAT III 300V Pollution degree 2
Power source
R03 (AAA)(1.5V)× 2 (Auto power off: Approx.10 minutes)
*Continuous measuring time:
AC A Approx. 46 hours, DC A Approx. 52 hours
Dimension
161(L) × 40(W) × 30(D)mm
Weight
110g (including battery)
Accessories
9113 (Carrying Case)
R03 (1.5V) × 2
Instruction Manual
Санал болгох бараа
Үйлдвэрлэгч
Хэмжих хэрэгсэл
Мультиметр
Амперклещ
Эсэргүүцэл хэмжигч- LCR метр
Осциллограф- Спектр анализатор
Дохионы үүсгүүр
Тэжээлийн блок- Цахилгаан хэмжигч, хайгч
Термометр- Орчны тестер
Шилэн кабел, cүлжээний тестер- Тахометр
- Зай, түвшин хэмжигч
- Бусад хэмжих хэрэгсэл
- Дагалдах хэрэгсэл
Гагнуурын хэрэгсэл
Нихром гагнуурын алх
Керамик гагнуурын алх- Тохируулгатай гагнуурын алх
- Үлээдэг гагнуурын алх
- Урьдчилан халаагч
- Утасгүй гагнуурын алх
Тугалга сорогч- Тугалга, давирхай
- Эд анги
- Хошуу
- Халаагч
- Гар
Туслах хэрэгсэл- Халуун цавуу, хөөс зүсэгч
- Хамгаалалтын хэрэгсэл
Гар багаж
- Халив
- Нарийн халив
- Том халив
- Цахилгаан халив
- Халив цуглуулга
- Тусгай түлхүүр, торцов
- Бахь
- Бахь
- Нугас, махир хошуут бахь
- Таслагч бахь
- Хямсаа
- Кабел үзүүрлэгч
- Төгсгөвч хавчигч
- Сүлжээний бахь, дарагч
- Шилэн кабелын багаж
- Цагираг түгжээ авагч
- Хайч, хутга
- Өрөм, хөрөө, хуурай
- 1000В гар багаж
- Туслах хэрэгсэл
Томруулдаг шил
- Микроскоп
- Томруулдаг шил
- Суурин томруулдаг шил
Багажны цуглуулга
- Электроникийн багаж
- Цахилгааны багаж
- Сүлжээний багаж
- Багажны цүнх
Лавлах утас: 77107805, 99198321
Хаяг : Улаанбаатар хот, Чингэлтэй дүүрэг, Компьютер ланд, 3-н давхар, 12 тоот
“ЧИП ЭЛЕКТРОНИКС” ХХК
© Copyright – 2026 www.chip.mn





