LCR метр LCR-8205

Features

- Wide Test Frequency 10Hz ~ 5MHz

- 7” LCD color Display

- 0.08% Basic Accuracy

- Displaying Four Measurement results simultaneously from 17 selectable measurement parameters freely

- 15 steps List Measurement

- Two Curves Sweep Mode

- Internal DC Bias Voltage ±12V

- USB Storage available

- ALC function available

- Standard Interfaces : RS-232C, USB host/device, LAN, GPIB and Handler

- Universal power input

SPECIFICATION

MODEL

LCR-8205

TEST FREQUENCY

DC, 10Hz ~ 5MHz;

6 Digits, ±0.0007%

OUTPUT IMPEDANCE
	25Ω / 100Ω SELECTABLE
BASIC ACCURACY
	±0.08%
TEST SPEED
	MAX: 25ms(>10kHz), FAST: 50ms(>20Hz), MEDIUM: 100ms SLOW: 300ms, SLOW2: 600ms
TEST SIGNAL LEVEL
AC Voltage: AC Current: DCR Voltage:	10mV ~ 2Vrms (FREQ. ≦ 1MHz), 10mV ~ 1Vrms (FREQ. > 1MHz or FREQ. ≦ 1MHz and RO=25Ω) 100μA ~ 20mArms (RO=100Ω), 200μA ~ 40mArms (RO=25Ω) 1Vdc (40mA max.)
MEASUREMENT PARAMETERS
	Maximum four parameters can be measured and displayed at the same time Impedance (Z), Inductance (Ls / Lp), Capacitance (Cs / Cp), AC Resistance (Rs / Rp), Quality Factor (Q), Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Phase Angle (θd / θr), Susceptance (B), DC Resistance (Rdc)
LIST MEASUREMENT
Listed Steps: Listed Parameters: Trigger:	15 Freq/Vac/Iac/DC Bias/Comp/BIN AUTO, REPEAT, SINGLE

MODEL		LCR-8205
SWEEP MEASUREMENT
Swept Graphical: Swept Parameters:	Two of measurement parameters Freq/Vac/Iac, Keep Trace
OTHER FUNCTIONS
Auto Level Control (ALC): DC Bias: Handler:	Standard 0 ~ ±12V PASS, FAIL and OK, NG or BIN 1-9
OTHER FEATURES
Correction: V/I Monitor: Comparator: Buzzer: Average:	Open/Short/HF Load/Load Vac, Iac, Vdc, Idc Value, Δ , Δ % OFF, Pass, Fail 1 to 64
DISPLAY	7″ LCD color display (800×480)
INTERFACE	USB/GPIB/LAN/RS-232/Handler/USB Host/TRIGGER Input
POWER SOURCE	AC 100V~240V, 50/60Hz; Consumption: 65VA (max.)
DIMENSIONS & WEIGHT	346 (W) X 145 (H) X 335 (D) mm; Approx. 3.3kg