Дохионы үүсгүүр AFG-2105

  • үнэ: 950,000 төг

Функцын генератор AFG-2105

Features

  • - 0.1Hz to 5MHz with in 0.1Hz Resolution
  • - Sine, Square, Triangular, Noise and Arbitrary Waveform
  • - 20MSa/s Sampling Rate, 10 bit Vertical Resolution and 4k Point Memory for Arbitrary Waveform
  • - 1% ~ 99% adjustable duty cycle for Square Waveform
  • - Waveform Parameter Setting Through Numeric Keypad Entry & Knob Selection
  • - Amplitude, DC Offset and Other Key Setting Information Shown on the 3.5” LCD Screen Simultaneously
  • - AM/FM/FSK Modulation, Sweep, and Frequency Counter Functions (AFG-2100 only)
  • - USB Device Interface for Remote Control and Waveform Editing
  • - PC Arbitrary Waveform Editing Software

 


The AFG-2100/2000 Series Arbitrary Function Generator is a DDS (Direct Digital Synthesized) based signal generator designed to accommodate the Educational and Basic Industrial requirements for an accurate and affordable signal source covering the output of Sine, Square (Pulse), Ramp (Triangle), Noise and Arbitrary waveforms. The 20M Sa/s sampling rate, 10 bit vertical resolution and 4k point memory of the AFG-2100/2000 Series provide user with a flexible environment for creating the specific waveform output as needed. The 0.1Hz resolution of Sine, Square and Triangle waveforms and the 1% ~ 99% adjustable duty cycle of Square (Pulse) waveform are the remarkable features to greatly extend its application range in various fields.
The AFG-2100/2000 Series includes 6 models in three frequency bands of 5MHz, 12MHz and 25MHz. Besides the basic features of the whole AFG-2100/2000 Series, AFG-2100 also carries additional features of AM/FM/FSK Modulation, Sweep, and Frequency Counter.

The user friendly interface of AFG-2100/2000 Series allows user to set waveform parameters, including waveform type, frequency, amplitude, DC offset, modulation type, and duty cycle, through keypad entry and/or the knob selection, and display the set parameters on the 3.5” LCD screen. The AFG-2100/2000 Series is equipped with a USB Device interface for remote control and waveform editing through a PC. A waveform editing software is provided to facilitate the waveform creation on the PC. After the waveform editing is done, the user is able to download the waveform data from PC to the AFG-2100/2000 Series for signal output.

  • – Arbitrary Waveform Function
  • – Adjustable Duty Cycle
  • – Parameter Setting
  • – Waveform Amplitude & DC Offset
  • – AM/FM/FSK Modulation, Sweep & Frequency Counter
  • – USB Interface
  • – Arbitrary Waveform Editing PC Software

 

AFG-2100 & AFG-2000 Specifications

The specifications apply when the AFG-2100 & AFG-2000 is powered on for at least 30 minutes under +20°C~+30°C. 

Models AFG-2000 series AFG-2100 Series
2005 2012 2025 2105 2112 2125
Waveforms
 

Sine, Square, Ramp, Noise, Arbitrary Waveform

Arbitrary Waveform
 Sample Rate 20 MSa/s
Repetition Rate 10MHz
Waveform Length 4k points
Amplitude Resolution 10 bit
Non-Volatile Memory 4k points
Frequency Characteristics
Range Sine, Square 0.1Hz

|

5MHz

0.1Hz

|

12MHz

0.1Hz

|

25MHz

0.1Hz

|

5MHz

0.1Hz

|

12MHz

0.1Hz

|

25MHz

Ramp 0.1Hz ~ 1MHz
Resolution Sine, Square, Ramp 0.1Hz
Accuracy Stability ±20 ppm
Aging ±1 ppm, per 1 year
Tolerance ≦ 1 mHz
Output Characteristics
Amplitude Range 1  mVpp to 10 Vpp( into 50Ω), 0.1Hz~20MHz

2  mVpp to 20 Vpp(open-circuit) , 0.1Hz~20MHz

1  mVpp to 5 Vpp( into 50Ω), 20MHz~25MHz

2  mVpp to 10 Vpp(open-circuit), 20MHz~25MHz

Accuracy ± 2% of setting ±1 mVpp (at 1 kHz/into 50Ω without DC offset)
Resolution 1 mV or 3 digits
Flatness ± 1%  (0.1dB)  ≦100kHz

± 3% (0.3 dB)   ≦5MHz

± 4% (0.4 dB)   ≦12MHz

± 20% (2 dB)   ≦20MHz

± 5% (0.4 dB)   ≦25MHz

(sine wave relative to 1 kHz/into 50Ω)

Units Vpp, Vrms, dBm
Offset Range ±5 Vpk AC+DC (into 50Ω)

±10Vpk AC+DC (Open circuit)

±2.5 Vpk AC+DC (into 50Ω) for 20MHz-25MHz

±5Vpk (Open circuit) for 20MHz-25MHz

Accuracy 2% of setting + 10 mV+ 0.5% of amplitude
Output Impedance 50Ω typical (fixed) > 300kΩ (output disabled)
Protection (main output) Short-circuit protected by overload relay automatically disables main output
SYNC Output

 

 

Level TTL-compatible into>1kΩ
Impedance 50Ω nominal
Rise or Fall Time ≦25ns
Sine wave

Characteristics

Harmonic Distortion –55 dBc DC ~ 200kHz, Ampl > 0.1Vpp

–50 dBc 200kHz ~ 1MHz, Ampl > 0.1Vpp

–35 dBc 1MHz ~ 5MHz, Ampl > 0.1Vpp

–30 dBc 5MHz ~ 25MHz, Ampl > 0.1Vpp

Square wave Characteristics Rise/Fall Time ≦25ns at maximum output (into 50Ω load)
Overshoot < 5%

 

Asymmetry 1% of period+1 ns
Variable Duty Cycle 1.0% to 99.0%  ≦ 100kHz

20.0% to 80.0% ≦ 5 MHz

40.0% to 60.0% ≦10MHz

50%  ≦ 25MHz

(1% Resolution for full Frequency Range )

Ramp

Characteristics

Linearity < 0.1% of peak output
Variable Symmetry 0% to 100%(0.1% Resolution)
AM Modulation
Carrier Waveforms Sine, Square, Triangle
Modulating Waveforms Sine, Square, Triangle
Modulating Frequency 2 mHz to 20 kHz (Int)

DC to 20KHz (Ext)

Depth 0% to 120.0%
Source Internal / External
FM Modulation
Carrier Waveforms Sine, Square, Triangle
Modulating Waveforms Sine, Square, Triangle
Modulating Frequency 2 mHz to 20 kHz (Int)

DC to 20KHz (Ext)

Deviation DC to Max Frequency
Source Internal / External
SWEEP
Waveforms Sine, Square, Triangle
Type Linear or Logarithmic
Start F / Stop F 0.1Hz to Max Frequency
Sweep Time 1 ms to 500 s
Source Internal / External
FSK
Carrier Waveforms Sine, Square, Triangle
Modulating Waveforms 50% duty cycle square
Modulation Rate 2mHz to 100kHz(INT)

DC to 100kHz(Ext)

Frequency Range 0.1Hz to Max Frequency
Source Internal / External
Frequency Counter
Range 5Hz to 150MHz
Accuracy Time Base accuracy±1count
Time base ±20ppm (23℃ ± 5℃) after 30 minutes warm up
Resolution 100nHz for 1Hz,

0.1Hz for 100MHz.

Input Impedance 1kΩ/1pf
Sensitivity 35mVrms ~ 30Vms (5Hz to 150MHz)
System Characteristics
Store/Recall 10 Groups of Setting Memories
Interface USB(Device)
Display LCD
General Specifications
Power Source AC100~240V ,  50~60Hz
25 VA
Operating Environment Temperature to satisfy the specification :  18 ~ 28 C  Operating temperature :  0 ~ 40 C

 

Relative Humidity: ≤ 80%, 0 ~ 40°C

≤ 70%, 35 ~ 40°C

Installation category: CAT Ⅱ

2000 meters
-10 ~ 70 C, Humidity: ≤70%
Dimensions (WxHxD) 266(W)×107(H)×293(D) mm
Weight Approx. 2.5 kg
Accessories CD (user manual + software) ×1 , Quick Start Guide x1, Power cord×1
GTL-101× 1 GTL-101× 2

 

Санал болгох бараа