Хавтан > Угсармал хавтан > ДЭЛГЭЦ, ЛЕД модуль > 7.5″ E-Ink display HAT for RPi, 3-color, 640×384

7.5″ E-Ink display HAT for RPi, 3-color, 640×384

үнэ: 230,000 төг

640x384, 7.5inch E-Ink display HAT for Raspberry Pi, yellow/black/white three-color, SPI interface

SKU: 14229
Part Number: 7.5inch e-Paper HAT (C)
Brand: Waveshare
UPC: 614961951709

Package content:

7.5inch e-Paper (C) x1
e-Paper Driver HAT x1
RPi screws pack (2pcs) x1
PH2.0 20cm 8Pin x1

Weight: 0.065 kg

Overview

This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640×384 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

– No backlight, keeps displaying last content for a long time even when power down
– Ultra low power consumption, basically power is only required for refreshing
– Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
– SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
– Onboard voltage translator, compatible with 3.3V/5V MCUs
– Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

– Operating voltage: 3.3V~5V
– Interface: SPI
– Outline dimension: 170.2mm × 111.2mm
– Display size: 163.2mm × 97.92mm
– Dot pitch: 0.255 × 0.255
– Resolution: 640 × 384
– Display color: yellow, black, white
– Grey level: 2
– Full refresh time: 16s
– Refresh power: 38mW(typ.)
– Standby power: <0.017mW
– Viewing angle: >170°

Interface

SYMBOL	DESCRIPTION
VCC	3.3V~5V
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output, low active