2.13″ E-Ink display HAT for RPi, 250×122

  • үнэ: 50000 төг

250x122, 2.13inch E-Ink display HAT for Raspberry Pi, SPI interface

SKU: 12915
Part Number: 2.13inch e-Paper HAT
Brand: Waveshare
UPC: 614961950498

Package content:

  1. 2.13inch e-Paper HAT x1
  2. RPi screws pack (2pcs) x1
  3. PH2.0 20cm 8Pin x1

Weight: 0.014 kg

Overview

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250×122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

  • – No backlight, keeps displaying last content for a long time even when power down
  • – Ultra low power consumption, basically power is only required for refreshing
  • – Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • – SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • – Onboard voltage translator, compatible with 3.3V/5V MCUs
  • – Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

  • – Operating voltage: 3.3V/5V
  • – Interface: SPI
  • – Outline dimension: 65mm × 30.2mm
  • – Display size: 23.71mm × 48.55mm
  • – Dot pitch: 0.194 × 0.194
  • – Resolution: 250 × 122
  • – Display color: black, white
  • – Grey level: 2
  • – Partial refresh time: 0.3s
  • – Full refresh time: 2s
  • – Refresh power: 26.4mW(typ.)
  • – Standby power: <0.017mW
  • – Viewing angle: >170°

Interface

SYMBOL DESCRIPTION
VCC 3.3V/5V
GND Ground
NC NC
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, high active

Dimensions

Development Resources

Wiki : www.waveshare.com/wiki/2.13inch_e-Paper_HAT

Санал болгох бараа