Хавтан > Угсармал хавтан > ДЭЛГЭЦ, ЛЕД модуль > 2.7″ E-Ink display HAT for RPi, 3-color, 264×176

2.7″ E-Ink display HAT for RPi, 3-color, 264×176

үнэ: 65,000 төг

264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface

SKU: 13357
Part Number: 2.7inch e-Paper HAT (B)
Brand: Waveshare
UPC: 614961950955

Package content:

2.7inch e-Paper HAT (B) x1
RPi screws pack (2pcs) x2
PH2.0 20cm 8Pin x1

Weight: 0.036 kg

Overview

This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264×176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

– No backlight, keeps displaying last content for a long time even when power down
– Ultra low power consumption, basically power is only required for refreshing
– Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
– Onboard 4x Keys
– SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
– Onboard voltage translator, compatible with 3.3V/5V MCUs
– Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

– Operating voltage: 3.3V/5V
– Interface: 3-wire SPI, 4-wire SPI
– Outline dimension: 85mm × 56mm
– Display size: 57.288mm × 38.192mm
– Dot pitch: 0.217 × 0.217
– Resolution: 264 × 176
– Display color: red, black, white
– Grey level: 2
– Full refresh time: 15s
– Refresh power: 26.4mW(typ.)
– Standby power: <0.017mW
– Viewing angle: >170°

Interface

SYMBOL	DESCRIPTION
VCC	3.3V/5V
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output, low active