Хавтан > Угсармал хавтан > ХОЛБОЛТЫН модуль > XBP24CZ7SIT-004 RF XBee-PRO S2C

XBP24CZ7SIT-004 RF XBee-PRO S2C

үнэ: 140,000 төг

The XBP24CZ7SIT-004 from Digi International is a through hole mount, standard XBee-PRO® S2C ZigBee RF module with RPSMA connector for OEM. Embedded ZigBee module provides OEMs with a simple way to integrate mesh technology into their application. It is ideal for applications in the energy and controls markets where manufacturing efficiencies are critical. The Serial Peripheral Interface (SPI) provides a high-speed interface and optimizes integration with embedded microcontrollers, lowering development costs and reducing time to market. Digi's ZigBee compatible module is based on the Ember EM357 system on chip (SoC) radio ICs from SiliconLabs, utilizing 32bit ARM Cortex™ M3 processor. FCC, IC (North America), RCM (Australia and New Zealand) regulatory approvals.

– RF 250Kbps, serial up to 1Mbps data rate
– Firmware upgrades via UART, SPI or over the air (OTA)
– Indoor/urban range up to 300ft (90m), outdoor/RF line of sight range up to 2miles (3200m)
– Transmit power is 63mW (+18dBm)
– Receiver sensitivity is -101dBm
– ISM 2.4GHz frequency band, DSSS (direct sequence spread spectrum) interference immunity
– (4) 10bit ADC inputs, 15 digital I/O, 128bit AES encryption
– Operating temperature range from -40°C to +85°C, supply voltage from 2.7V to 3.6V
– Dimension is 0.960inch x 1.297inch (2.438cm x 3.294cm)
– Transmit current is 120mA at 3.3VDC and receive current is 31mA at 3.3VDC

Features

– Supports binding and multicasting for home automation
– Mesh-network topology
– 2.4 GHz for worldwide deployment
– Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
– Industry leading sleep current of sub 1 µA
– Firmware upgrades via UART, SPI or over the air

Application Ideas